Electrical and Wiring

Double USB Power socket

 

Navboys now have in stock a double socket USB bulkhead connector which is very low noise (electrical noise).  More and more pilots want to be able to charge their mobile phones or drive I pad’s whilst flying and getting a low noise power supply at a sensible price has been difficult until Now. Navboys have sourced a really low (electrical) noise USB double socket bulkhead charger compatible with most phones and I pad’s. Simply connect to a 12v fused supply and the socket will deliver up to 2Amps at 5V to each USB socket.

Battery Cap 

 

You’ve spent thousands of pounds on your instruments so why let a tatty looking battery power them?

 

This prestige battery cap comes prebuilt with 10A circuit breaker terminated to a 2core flex cable. All you have to do is terminate the bare end with your chosen connector (usually a 3 pin female XLR), push on the secure spade connections and glue the cap on the battery.

Still too much effort? Buy our prebuilt battery that is ready to plug in and go

Type 55 and Type 44 Wire - EASA Approved

 

These cables are the higher standard of EASA approved dual insulated wire suitable for avionic installations. Sold per M and only available in White.

 

18 AWG 

20 AWG - 10 Amp

22 AWG

24 AWG -   6 Amp

20AWG - Shielded: Ideal for microphone and speaker wiring

 

Features of this wire:

 - Dual wall construction, very good abrasion resistance, 

 - Low smoke generation,

 - Highly flame retardant.

XLR Plug - Male

 

Precision engineered connector from Neutrik. This is a high quality 3 pin XLR connector with male connection that is usually soldered to the glider or battery charger.

 

XLR Plug - Female

 

Precision engineered connector from Neutrik. This is a high quality 3 pin XLR connector with female connection that is usually soldered to the battery.

XLR Socket

 

Precision engineered connector from Neutrik. This is a high quality 3 pin XLR panel mount socket connector with male connection that is usually mounted into the glider and soldered to the glider electrical system.

In Line Fuse Holder

 

The in-line fuse holder offers easy fuse changing and can be used with standard automotive ATO blade fuses from 1-20Amp.

Blade Fuses

 

Blade automotive fuses equivalent to ATO sold in pairs.

Panel Mount Fuse Holder

 

Thermoplastic panel mount fuse holder rated up to 6.3A.

Compatible with cartridge fuses 5mmX20mm

Cartridge Fuses

 

Cartridge fuses 5mmX20mm

Compatible with NavBoys Panel Mount Fuse Holder (up to 6.3A). Sold in pairs

Switches

Toggle Switch

 

SPDT Toggle Switch On-Off-On, 5 A

Toggle Switch

 

SPDT Toggle Switch On-Off-On, 6 A

12 Way Connection Bar      

 

This connection bar is insulated and marked 1 to 12. Used commonly in instrument panels for neat connection of spade terminals.

It could also be daisy chained on one side to turn it into a bus bar or it can take the power output from the toggle switch and connect the positive instrument supply.

4 Way Bus Bar

 

This bus bar is insulated and commonly used for instrument panels for neat connection of commonly connected devices by a spade type connector.

5A Circuit Breaker

 

After searching the market NavBoys has found this excellent panel mounted 5A push to reset circuit breaker. It's compact compared to most and connection is made by spade type connectors on the back.

 

CONTACT US

 

NAVboys Newsletter

Regular, news, instrument updates, gossip, comps, airspace and TP's. We will keep you up to date but wont spam you to death.

*  Your Email Address:
*  Enter the security code shown:

Email marketing by Interspire