LX S100 80mm and S10 57mm Vario and final glide computer with Flight recorder, Bluetooth and 3 hour backup battery

 

Standard ø80mm or ø57mm all glass Variometer with extremely powerful processor • Using MEMS inertial platform and pressure sensors • built in AHRS • 3.5” (S100) of 2.5" (S10) high brightness screen (320x240 pixels) sunshine readable • Fast wind calculation 50 times per second. Built in Flarm display, navigation, airspace, “go to” waypoint and task planning. GPS or Flarm input and PDA/Oudie power and data output. The S100 and S10 also feature built in Bluetooth and an IGC approved Flight recorder with GPS receiver plus a 3 hour internal backup battery. Should all the power fail, your vario keeps working and your flight recorder keeps recording! (AHRS enabled through additional firmware)

S100 and S10 are available and in stock as are the S80D and S8D rear seat repeater

Main Features

  • Bluetooth integrated
  • Built-in Battery which serves up to 3h of operation
  • High level approved IGC flight recorder
  • Built in GPS module
  • ARM Cortex-M4 processor running on 160MHz
  • 3.25” or 2.5'' QVGA sunlight readable screen with 1200nits
  • QVGA (320*240pixels) sunlight readable display
  • Digital temperature compensated pressure sensors for altitude and airspeed
  • Inertial platform 3 axis digital +-8g accelerometer, 3 gyroscopes (for inertial vario, AHRS and wind calculation - AHRS can be activated with the code)
  • Smooth audio output
  • Audio equalizer
  • Integrated synthesized speech output 
  • Audible thermal assistant
  • External SD card for configuration, flarmnet and firmware update
  • 2 rotary switches (knobs) with push button function and 3 push buttons are used for input
  • ALS (ambient light sensor)
  • 6 digital inputs - SC, VP + 4 custom defined
  • 80 mm or 57 mm

User Interface

  • Moving map with airspace track up option
  • Airspace display
  • Waypoints and Task display
  • AHRS display (optional)
  • Thermal assistant
  • Display of 4 configurable (navboxes) values
  • Display of 3 configurable (navboxes) values on map screen
  • Waypoint navigation
  • TASK navigation
  • Flarm radar
  • Flarm warnings
  • Flarm Net
  • Logbook (Integrated High level approved flight recorder)

Colour display

  • 16 bit colour display
  • 3.25” or 2.5”(~ 9cm or 6.5cm) screen
  • 320 by 240 pixel resolution
  • 1200 nits brightness

 

Input and output

  • Flarm port input/output on RS232 level (standard IGC 6 pin connector RJ11)
  • PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A)
  • Audio output
  • 1Mbit CAN bus for connection for S8D or S80D repeater, Compass module or Remote stick
  • Speed command and Vario priority input and 4 additional user defined inputs
  • Two Rotary knobs with push function
  • 3 push buttons

 

 

Optional accessories

  • AHRS activation with a CODE - no need of any hardware upgrade
  • Remote stick (CAN)
  • Compass module (not supported yet - under development)
  • S80D/S8D repeater unit
  • Oudie
  • Nano/Nano3
  • CAN2PD Second seat PDA support

 

Power supply

  • Power input 10-16V DC
  • Consumption of LXNAV S10 at 12 V:
    • 230 mA - minimum brightness without audio
    • 270 mA - maximum brightness without audio
  • Consumption of LXNAV S8D at 12 V:
    • 90mA - maximum brightness
    • 140 mA - maximum brightness without audio

 

Size and weight

  • Standard 80mm (3.25”) or 57mm (2.5") hole
  • S10 61x61x70mm (excludes connectors)
  • S100 81x81x64mm (excludes connectors)
  • S10 weight: 345g
  • S100 weight 515g

 

CONTACT US

 

NAVboys Newsletter

Regular, news, instrument updates, gossip, comps, airspace and TP's. We will keep you up to date but wont spam you to death.

*  Your Email Address:
*  Enter the security code shown:

Email marketing by Interspire