Related Products
LXNAV LX8000

LXNAV LX8000From:  £1,879.00


LXNAV LX9000

LXNAV LX9000From:  £4,435.00


LXNAV LX9050

LXNAV LX9050From:  £2,215.00

LXNAV LX8080

LXNAV LX8080
  Zoom


Our Price:  £3,056.00(Inc. 20% VAT)(£2,546.67 Exc. VAT)
+
Version:  
Built In FLARM:  
Vario:  
LX AHRS - Activated:  

Brand:  LXNAV

The LX8080 is a high end vario navigation system with extremely bright colour display. Fits to standard 80mm hole for the main unit and 57mm hole for the V9 vario. Simple and logical user interface is designed for top-level competitors, club operation as well as for gliding beginners. The Instrument is preloaded with worldwide terrain maps, airspace and airports databases. User friendly data exchange is done using SD Card or USB interface. LX8080 has an integrated FLARM collision avoidance system and flight recorder meeting IGC specification for all flights. LX8080 copes with complex tasks such as assigned area. During flight, optimisation is possible to FAI and OLC rules are displayed. The LX8080 uses exactly the same software as the LX8000 and LX9000. Basically it’s just a slightly smaller version of the LX8000 that fits in a standard 80mm and 57mm panel holes.

Integrated ADS-B adds to the functionality by adding a transponder and ADS-B receiver. In addition to Flarm equipped aircraft, the unit will also provide proximity warnings for transponder equipped aircraft. Aircraft without ADS-B out capability will be shown with approximate range and altitude difference (Mode-C). Aircraft with ADS-B out will lead to the same warnings as for Flarm equipped aircraft.

                             Integrated ADSB                                          Optional         Optional                     -


  • Extremely bright color 2.8" QVGA display (320 by 240 pixels)
  • Low power, extremely bright color display (1200cd), readable in all sunlight conditions with backlight automatically adapted using photo-sensor
  • ARM processor with up to 800Mhz clock and 8GB storage memory
  • 56-channel uBLOX GPS receiver
  • Using Linux operating system (not CE Windows) ensures fast and stable operation of firmware
  • 6 push buttons and 4 rotary switches are used for input which compromise well known LX user interface.
  • Remote stick is available optionally for more comfort
  • Full customization with LX Styler program (with PC or directly on unit)
  • Multilanguage user interface
  • Prepared for integrated help
  • Preloaded with worldwide terrain maps, airspace and airport databases
  • Raster maps (IFOS, DFS, ROGERS DATA)
  • Simple and user-friendly update of databases using integrated micro SD Card or USB
  • Integrated flight recorder according to high-level IGC specification
  • Engine noise level sensor
  • Flights stored in IGC format are downloadable using integrated micro SD Card or USB stick
  • Support for multiple waypoint and task databases with virtually no limitations
  • Support for CUPX format (points with photos)
  • Manage complex tasks with assigned areas
  • Real-time flight optimization according to FAI and OLC rules
  • Rich full flight and task statistics
  • integrated FLARM collision avoidance system with graphic, sound and voice presentation
  • Low power consumption - 280mA at 50% brightness including V5/V9 vario.
  • 262144 colors
  • 2.8" (7.1cm) diagonal screen
  • 320 by 240 pixel resolution
  • sunlight readable TFT (1200 cd)

 

  • ARM processor with 800 MHz clock
  • 16 Gb storage memory
  • 6 push buttons and 4 rotary switches
  • 56-channel uBlox GPS receiver, supports GALILEO and GLONASS
  • integrated FLARM transmitter and receiver (optional)
  • Engine noise level sensor
  • Pressure altitude sensor

 

  • Integrated SD card reader
  • Serial RS232 interface
  • RS485 bus interface
  • FLARM interface
  • USB interface

 

  • Second Seat Device (LX90xxD or LX80xxD)
  • Remote Control for first and second seat
  • High precision compass module
  • MOP sensor
  • Flap position sensor
  • Additional Vario Indicators (I9 or I8/I80)
  • Flarm ACL
  • External Flarm display
  • AHRS option
  • ADSB receiver (see other aircrafts as flarm objects on map)
  • Radio and transponder bridge
  • Wi-fi module

 

  • Dual ARM Cortex-M4 processor on 160MHz
  • Extremely bright 2.5” color display with 320x240 pixels
  • Digital temperature compensated pressure sensors for altitude and airspeed
  • Inertial platform 3 axis digital +-6g accelerometer, 4 gyroscopes (for inertial vario, AHRS and wind calculation)
  • No mechanical parts allow extremely fast response time of needle
  • Additional Flarm radar screen and artificial horizon
  • 3 push buttons for setting adjustments
  • ALS (ambient light sensor)
  • External SD card for configuration, flarmnet and FW update

 

  • ARM  Cortex-M4 processor running on 160MHz
  • Mechanical needle driven by stepper motor
  • QVGA (320*240pixels) sunlight readable display
  • Digital temperature compensated pressure sensors for altitude and airspeed
  • inertial platform
  • 3 axis accelerometer 
  • 3 axis gyros 
  • AHRS (optional with activation code)
  • Smooth 16bit audio output 
  • Audio Equalizer 
  • integrated synthesized speech output
  • Audible thermal assistant

 

  • Dual ARM Cortex-M4 processor on 160MHz
  • Extremely bright 3.5” (9 cm) color display with 320x240 pixels
  • Digital temperature compensated pressure sensors for altitude and airspeed
  • Inertial platform 3 axis digital +-6g accelerometer, 4 gyroscopes (for inertial vario, AHRS and wind calculation)
  • No mechanical parts allow extremely fast response time of needle
  • Additional Flarm radar screen and artificial horizon
  • 3 push buttons for setting adjustments
  • ALS (ambient light sensor)
  • External SD card for configuration, flarmnet and FW update

 

  • RS485 bus
  • Speed command and Vario priority input
  • additional 4 digital inputs
  • Smooth audio output
  • Speech output (voice module)
  • Flarm warning indication
  • Optional AHRS (V8 and V80)

 

  • 160mA at 12V at 50%  LCD brightness (600nits still readable under sunlight)
  • 260mA at 12V with integrated Flarm at 100% LCD brightness (1200nits)
  • Current drain V5 120mA at 12V 
  • 280mA (brightness at 50% + V5)
  • Smart power management
  • Automatic backlight regulation with ALS (Ambient Light Sensor)

 

  • Display unit 82mm x 82mm x 60mm depth
  • Vario unit fi57mm x 115mm depth
  • Weight: ~435g (without vario unit)