Oxygen bottle filling adapter - CGA540£69.00
Oxygen bottle filling adapter - DIN477£69.00
Oxygen bottle mounting kit£109.00
Home > Pilot Equipment and Accessories > Oxygen Equipment > Cylinders
German Steel oxygen bottle for many older German gliders including Schleichers, LS and DGs.
This bottle comes with the European DIN-477 thread so will need a DIN-477 regulator.
The steel bottles also come with no gauge, so you will need a DIN-477 regulator with gauge to monitor pressure levels.
If you buy this bottle as part of a kit you will automatically be provided with the correct regulator.
German Bottles will have a minimum of 8 years before a re test is required.
Dimensions: 100mm diameter, length 58cm, length to bottleneck 47cm.
Capacity: will hold 600L of oxygen (at 200 bar filling pressure)
Weight: 4.8kg.
Originally I purchased a MH bottle that was just 1mm too large in diameter to fit. There was no problem exchanging it for a steel bottle that will fit. Next week we intend to install the O2 system including MH EDS. I shall advise when in use. First class service as always.
Was this helpful to you? Yes / No
This review has not been appraised.
