A 0.4meter long cable designed to go from the LXNAV radio bridge (being used with an LX90xx/LX80xx device), to a BECKER AR6201 J1 Plug. This is the bottom plug on the back of the Becker.
If you have a two-seat radio setup, then you will not need this cable as your J1 plug will already be in use for the rear seat repeater. Instead, you can use the cable that comes with the LXNAV radio bridge and you will need to manually solder the open ends into your existing J1 plug.
Alternatively if you would like a quote for us to do this for you, please contact us here.