Pin 3 TX output wire for ACD57 plug

(Inc. 20% VAT)
(£6.67 Exc. VAT)

This is for a 0.5m length of 22AWG wire with a crimped pin on the end to go into a plug for the ACD57 - this can be used for pin 3 on the ACD57 plug in a harness such as the B430 or the B527 harness, to enable RS232 output to an external device such as an LXNAV control (radio) bridge. Using this in conjunction with the existing shielded wire coming out of the B430 harness (which is connected to pin 2 and ground). You can then connect these to the RJ12 cable that comes with a radio bridge and connect to an LXNAV LX90xx/LX80xx glide computer.

More Information
Customer Reviews

Be the first to Write a Review for this item!